Hi, I got one of your boxes and installed opnsense. But why am I getting a max of 720Mbit/s using iperf3. This is the hardware line speed between the Intel NICs of the board and my client, which is 2.5Gbps laptop (Intel). The board has 4x Intel 1Gbit ports and the hardware line speed measured with iperf3 should be closer to 940Mbit/s . I am using a short CAT6 cable directly connected to the Nitrowall. No VPN , normal CPU load, it doesn't matter if powerd is set to HiAdaptive or off, it doesn't matter if HW offloading boxes for CRC etc are ticket on or off. The box seems to be underperforming for some reason and it is unable to handle/utilize a 1 Gbit stream. Please confirm if this is the norm due to older CPUs or if anything I can try to boost performance?